Aqua Pool Tile Cleaning firsts lowers the water level of your pool and spa by about 2-3 inches. There is no need to drain your pool.
Next we clean your pool tile with a pressure washer. Attached to the washer is a special nozzle and hose which discharges a mixture of water and a naturally mined mineral called Kieserite.
Kieserite is more commonly known as Epsom Salt. This mineral is PH neutral so there is no need to adjust your water chemicals. We do not use glass beads or Soda. The process not only cleans off the calcium and dirt, but also polishes the pool tile. The mineral used is much softer than the tile or stone being cleaning which makes mineral blasting the safest way to clean your pool tile.
After the entire pool tile perimeter of buildup is cleaned off, we start vacuuming up the mineral with our powerful vacuum. We use our own filters and pumps to clean your pool tile and spa. Some of the mineral will dissolve in the water causing a slight cloudy appearance. This condition will clear out within 24 hours.
Aqua Pool Tile Cleaning then finish's the job by removing all of our equipment and washing everything down. We always leave your pool area clean and ready to use. The average size pool and spa usually takes about 4-6 hours to clean. It depends on how much buildup is on your pool tile or pebble tec.
Our process also works on natural and artificial rock, fountains, brick, concrete pavers, concrete decking, walks and driveways. We will gladly provide you with an quote on all of your cleaning or repair needs. View our Photo Gallery for the before and after pictures. You will be impressed by the difference.